Fitting a boiling water tap is a straightforward process, and you can find full instructions in our installation guide.

The maximum boiler temperature is 100°C with a hot water flow of 98°C.

Designed to protect young and vulnerable users, the Filtrata features a childproof safety lever.

The power rating of the Filtrata is 1.5kW.

For standard hot and cold water, simply turn the right hand lever 40 degrees either way and to access filtered cold water, the lever should be pulled 90 degrees forward. For instant boiling water, press the button and turn the left hand lever.

In the average household, it can cost as little as 3p per day to use a Filtrata 4-In -1 Boiling Water Tap.

Full technical drawings are available on the product pages for our full Filtrata Collection.

The filter length is 30.5cm, with a diameter of 6.28cm.

Our boiling water tap contains a childproof safety lever to ensure that no accidents occur, giving you added peace of mind.

The Filtrata tap functions are as follows: Right hand lever - side pull 40 degrees either way for standard hot and cold water. Right hand lever - pull 90 degrees forward for filtered cold water. Left hand lever - press in button and turn for instant boiling water.

Depending on the area you live in will depend on how often the filter needs changing. If you live in a hard water area, we recommend changing the filter every three months, medium water areas need changing every four months and soft water areas, every six months.

From the first setup the water takes around eight minutes to heat up. However, this is subject to water and area conditions. If the boiling water drops below the set temperature it will take a couple of minutes to heat up again.