You are purchasing the complete kit for your Wetroom! (Please select our product downloads tab to view our fitting instructions guide)
Wetroom tray sizes available - 800 x 800, 900 x 900, 1000 x 1000, 1200 x 900, 1200 x 1200, 1800 x 900, 1200 x 1200, 1500 x 900 & 1500 x 1500mm
Why our foam cored Wetroom tray is so special:
Our Underlay Wet floors and Tile Backer Boards are made from extruded foam (not agglomerated styrene particles) with high compressive strength and tough impact resistant surface. As a result, this allows the use of tiny (20mm x 20mm) mosaic tiles. Customers can have total peace of mind that the tile will not sink into the underlay.
Note: Beware of competitor products with densities of 12 – 24 tons per sq. meter.
The grid height may be adjusted to suit tiles from 8mm - 15mm thick and the factory fitted gasket around the drain provides a secondary waterproofing membrane. This unique grid/frame configuration also provides secondary under tile drainage. The Underlay tray can also easily be trimmed using a handsaw.
Stainless drain kit: The drain kit is specially designed for quick installation under the Wetroom former. When the former is fitted the trap is pulled up tight and sealed to the frame.
1 x Underlay tray for level access (requires under-boarding support).
1 x Drain waste kit with a stainless steel grid.
1 x Drain fitting aid.
1 x Pipe reducer 2" to 1 ½".
1 x Wetroom tanking liquid (covers 10m2)
1 x 1 litre Primer for porous surfaces.
1 x 10mt Flex Tape for wall/floor joint and other gaps.
2 x Flex internal corners
2 x Flex pipe collars
1 x 75mm brush
Drain kit with a stainless grid.
Drain fitting aid (provides extra strength).
High flow of water – 24 litres/minute.
Supplied complete with pipe reducer to 1 1/2 inch.
Please note: This Wetroom kit is not suitable for use with vinyl flooring. But unlike competitor kits it can be used with 20mm mosaic tiles.
We accept all major credit/debit cards for payment as well as PayPal. If your credit/debit card is rejected by our online payment processing systems, please double-check that all the details you entered on the website were correct. Your name and address details must match the cardholder address details held by your card issuer. If the problem persists, please contact your credit/debit card provider.
If the payment is not authorised by your bank or card issuer then the order will not be complete and we will not be able to fulfil the order. Please note that some issuing banks may still reserve your funds for a period of time.
All credit and debit card holders are subject to validation and authorisation by both us and the card issuer, to maintain security and prevent fraud. We work with Sage Pay to delivery essential service to our customer. Sage Pay are the fastest payment service provider that specialises in secure card payments solutions.
Please see our Terms & Conditions for more information
We have tried to keep our delivery charges to a minimum. We do not profit from delivery charges, what you pay is what we get charged and in some circumstances, it will cost us more.
All of our deliveries are fully insured.
Our standard delivery times are as follows:
Mon - Fri 9am - 6pm
Next day delivery and Saturday delivery can be arranged at an extra cost. Please contact us for further details.
Vanity units £39
Shower trays £39
For delivery quotes outside of the UK please call us on 0203 3704057
If you are ordering several products you will only pay one delivery charge (The higher amount)
All deliveries are to your door if you have a clear pathway and is a flat surface. For insurance purposes, we can not bring the product into your home. No baths will be brought up or down outside steps.
Although we thoroughly inspect all products before they leave our warehouse we advise you to check over the product once the delivery arrives and make sure you are totally happy with the quality and there is no damage.
Although we always deliver within the time scales quoted we recommend that you do not book your fitters until you have received your full order as we will not be responsible for any fittings costs relating to delayed deliveries.
If you receive your product and are not completely satisfied then please contact us at firstname.lastname@example.org so we can arrange the return. Once we receive the item back we will issue a refund via the original payment method.
(Please read Terms & Conditions) for further info on returns.